Let’s add CAD.
I’ve been screaming to everyone I know… Use freeCAD or other opensource CAD systems or free form modelers like Blender.org.
People who don’t know about Auto desk and PTC don’t know how evil those companies are. They’re dinosaurs and need to go. Let’s opensource the future.
God, I long for the day we get a decent open source CAD program but we just arent there yet. Script-based cad like OPENSCAD is just awful, especially for anything complex and extra-especially for assemblies, and while freecad has improved massively it’s still a very similar UX to Sketchup circa 2009 :(
CAD/CAM is one of the biggest underrepresented areas for opensource software, unfortunately largely because it’s so damn hard. There’s a reason basically every open-source polymodeling system pulls from Blender, and that’s because it’s the only robust opensource option out there that’s usable (though blender UI/UX is notoriously terrible for good reason, even after 2.8 and 3.2).
And unfortunately blender isn’t CAD software. Fun for noodly 3D printed parts and technically you can design functional components in it… but it’s deeply miserable to do.
IDK I’m just screaming into the void. grrgh.
Agree. Using freecad coming from Pro-E/Creo /Fusion 360/on shape/Solidworks is brutal.
Have you used Blender/FreeCAD as extensively as other proprietary paid software? You might just be used to other software being different. I think the Blender UI is pretty good and FreeCAD is just as capable as any other CAD program. I know someone who models the stuff from tootalltoby CAD Tournaments for fun in FreeCAD and he is about half as fast, but I think that’s fine for being an amateur.
Unfortunately, FreeCAD has some serious functional problems in my experience. I use CAD to make models for 3d printing, and with basically any other option I can make parts significantly faster and better. Also, I have never had an issue with another parametric modeler going back to change a dimension somewhere and it breaking the entire rest of the part, but conversely in FreeCAD I have never had that actually work. It is a complete mind fuck to finish printing a part, find out you got a dimension slightly wrong, and then having to basically start the entire fucking design process over because changing that dimension in FreeCAD just throws a bunch of errors and won’t show you a part anymore.
No, I am not a CAD expert, and I get that. But I can functionally use every other CAD software I have had the opportunity to use (I don’t count Blender for this, there are janky addons but that isn’t what Blender is). FreeCAD is near enough unusable. And anytime people bring up its shortcomings anywhere in the FreeCAD community, they get shit on for not doing CAD correctly, told that FreeCAD is exactly how it should be, and actually you are wrong for wanting it to be any different. I’ve spent countless hours trying to learn how FreeCAD wants me to operate, more than I’d ever spent learning Fusion360, and I still can’t get it to do what I would consider to be the bare minimum.
I think I’ve seen somewhere that you should set up reference values or something so that you can change parameters on the fly without breaking anything, which is insane to need to have to do that to avoid running into the ‘topological naming issue’ that magically no other package had a problem with. I’ve basically stopped using filets and chamfers because those will just destroy any chance I can update anything on the model later on.
The community really is brutal too. I remember reading someone getting taken down because they were asking how to extrude instead of pad while they were on the ‘part design’ workbench
Unfortunately the open source options for CAD have to come a very long way before I could even consider using them. Onshape is the only “free” option I’ve found that is bearable to use compared to the likes of SolidWorks and Creo.
FreeCAD unfortunately seems to be suffering from “open source hell UX”. I just tried installing it and the UI is glitching with black sections when I move my mouse. I can’t even get to the point of using this software. Unfortunately, FreeCAD is clearly not ready for serious wide-spread usage.

Yep. It’s a shame. The overall product is great. But the violation and abuse of the AGPL is unacceptable.
Violation of *GPL is bread and butter for most of 3D printer companies, locking out users out of features they paid for and used is terrible though.
shrugs in PRUSA
Which is why I did not write „all”. I had Prusa specifically in mind. It’s a shame they have to compete with companies that do not follow the rules as much as they do.
If only a Prusa XL didn’t cost more than my car…
Use your XL to print a new car. Problem solved.
Not trying to be argumentative, genuinely wanting to learn. What other violations have there been (or are there currently)?
https://github.com/CrealityOfficial/Ender-3_V3_KE_Klipper/issues/13 They all basically use klipper.
Ender 3s originally used Marlin has that changed? I thoughtKlipper required too much processing for the simpler printers like Enders.
The Ender 3 V3 has pretty much nothing in common with the Ender 3, other than the name and that it’s a bed slinger
Oh yeah? Well I’m never buying one in the first place because these problems were obvious.
I never let mine on the internet and use lan only using Orca slicer too so I don’t have to worry about Bambu Studio pushing an update to it which probably wouldn’t be an issue cause it was always garbage at connecting via lan anyway.
Same here, and I think it was also obvious to Jeff (from the OP), but I’m glad he bought one because he’s in a position to raise awareness of the issue.
I never bought a Bambu in the first place because all of this was foreseeable. Bambu costumers simply didn‘t care at the time.
That’s their market my brother bought 3 of them because he wanted to start a 3d printing business (with no additional planning so it did not last). Now I have one and my dad has one. I haven’t actually set mine up because I have my old Creator X clone dialed in and don’t really need anything more. Those two would probably never have gotten started if not for how easy the Bambus are. It took me a month to get decent results off my first printer and they were up and running in a few hours tops.
Shame on you for buying it in the first place. Writing was on the wall already.
F off with this stuff. Not everyone who bought one was fully aware of all the potential downfalls.
You should search this guy. I have heard time imagining he couldn’t have such foresight, but if that’s the case even more of a reason to unlike and unsubscribe - there are plenty of tech influencers that did and they are more likely to advise better for other products then.
Jeff from the OOP video? I will, I just mainly meant I got one a while ago and it seemed like a good choice at the time. I wasn’t into the hobby before that, and wasn’t well-versed in the topic. I’m sad to hear that it’s become this, but at the time it seemed like a good idea.
I’m sure many others were in the same boat. I just don’t think we should shame the some of us who didn’t do enough research before buying one.
The whole Bambu Lab situation isn’t really a surprise. Always stay away from companies that want to be the “Apple” of their niche.
Start “open-ish”, gain traction, start abusing market position, start closing things off, become hostile to your customers…
Like Firefox
(please someone correct me if I’m wrong on this)
Doesn’t boycotting Bambu ignore that they are one of the biggest names in 3D printing with a product that is cheaper and better than their main competitor (Prusa). Frankly, I don’t think anyone is going to spend 2x the amount for literally a worse product (Bambu P2S @ $550 vs Prusa Core One @ $999)
I get all the arguments about the repairability and longevity of Prusa printers, but when someone is saving for months to buy a luxury item I simply cannot see them making all those sacrifices
Turns out, the 3D printing world is thankfully NOT a duopoly. You have Qidi (their Q2 is very competitive from what I have heard), Sovol (makes a lot of good budget printers), Elegoo (lots of people love the Centauri Carbon), and even Voron machines if you’re into those! And a majority of the competitors make good machines that can be on par, and often times cheaper, than Bambu’s machines.
Additionally, Prusa not only is better for longevity, but you will also get far better customer support (Bambu’s support isn’t great)
Bambu is no longer to be trusted as they have been hostile to the open-source community, have blocked third-party software that used to work and hardware that people have bought, and no, putting it under a hidden developer mode doesn’t fix the issue. There are additional restrictions like not being able to access your printer remotely without something like Tailscale!
And given that they already have RFID tags on their filaments, I believe it’s a matter of time before they become the HP of 3D printers and block third-party filaments from being used
I’m looking to upgrade my ancient Ender-5 Plus and have been eyeballing Anycubic for the excellent pricing on multicolor printers.
You seem pretty knowledgeable, any recommendations or things to stay away from?
Stay clear of anycubic, they are moving in the same direction as bambulabs.
Haha was just about to buy one. Whats a good alternative hassle free printer that is still open?
Whats a good alternative hassle free printer that is still open?
AFAIK, Prusa is the leader in balancing openness, quality and ease of use.
Of course, since they’re in the EU and pay their staff living wages, they are also more expensive.
The thing is that they’ve dropped the ball. There are quite a few companies putting out printers that are objectively as convenient as a Bambu, for a third of the price, and others, like prusa and Snapmaker that have upstaged them with tool changers, which are way better than MMU machines, with negligible material waste, and orders of magnitude faster for multicolor. The maker scene is also alive and well- Vorons, VZbots, etc. allow you to make impressive machines, if you have some skills.
Can you recommend me a 3d printer or a few different ones to look into?
My applications will predominately be structural things, ie:
- Xbox controller attachments mount for my phone
- decorative guitar hooks
- custom shelving units
- gears for some electronic devices
- custom electronic cases
- figurines
- 3d toys (like mock guns, or just general odd things)
For structural things you NEED an enclosed printer, as most technical filaments need either heated chambers, air filtration or both. the Prusas (premium) centauri carbon, (budget), Snapmaker U1 (toolchanger), and which needs an addon cover, which in my opinion is right now the best bang for the buck. Sovol has teased a tool changer, and they make reasonably good and open source machines.









