Hi! I have a 2010 GTI, manual transmission, currently 120k miles, owned since new. Recently, when shifting into 2nd or 3rd, I’ve felt a vibration as if the clutch wasn’t quite in all the way. It’s only happened a couple of times over the last month.

Potentially Related Background: In 2017, I turned into a parking lot and couldn’t/didn’t see that there was a major curb separating incoming traffic. After a a horrific crunch (and some dripping evidence a few days later), I took the car in to a local VW tuning shop. They replaced the trans and clutch with used OEM parts, as was required by my insurance. Since then, the clutch has been weird, the gates to 1st and 2nd are really tight in cold weather, and my reverse lights don’t work. (I know the latter isn’t related, but it bugs me.)

My question: I’m barely skating by financially and need this car to last another 5 years. Is there any kind of preventive maintenance or other activity that can prevent what I fear?

    • WndyLady@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      4 months ago

      It’s been a bit since your answer, but I thought you might get a chuckle (or at least an eye roll) from my eventual discovery.

      I’m short. 5’2". As it turns out, losing 15 lbs was enough to change what it means to fully extend my left leg. After realizing my issue and moving the seat up by one click, I’ve not had the symptom repeat since (2 weeks).

      While I’m not enthused about having to sit so close to my steering wheel, I’m overjoyed that this was user error.

      Thanks for taking time to share your knowledge!

  • Death_Equity@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    5 months ago

    The harder to shift 1st and 2nd in the cold is common for a GTI, their transmissions are not great.

    Your reverse light issue is probably the switch not connected or just bad, they are a common issue as well. The switch itself is located on the transmission towards the front of the car and can be accessed by removing the engine air box, the switch costs like $15-40. I think it needs a 22mm deep socket, but you may be able to get a short 22mm wrench on it.